Posts Tagged ‘Honeycomb Grid’

How to use a honeycomb grid with your speedlight flash to create a spot of light

with 11 comments

Highlighting a small part of a photo with flash can be used to help draw the viewer's attention to that part of the image. When this technique is combined with an overall lack of light over the rest of the image, this can create a very dramatic photo, with the highlighted area really standing out.

However, with a standard speedlight flash this technique can be difficult to achieve as the light from the flash spreads out too much, covering most of the frame. You can reduce the coverage of the flash by moving it closer to the subject, but depending on how small an area you want highlighted, this could result in the flash having to be so close that it appears in the frame.

A cheap and simple solution to this problem is a grid. A grid attaches in front of your flash, and creates a narrow, focused beam of light. This allows you to have your flash positioned further away from your subject, while highlighting just a small area with the flash. In this article we'll look particularly at how to create your own DIY grid for your speedlight flash, and how different variations affect the light.

How to use a honeycomb grid with your speedlight flash to create a spotlight effect

Read the rest of this entry »

Written by Discover Digital Photography

September 21st, 2014 at 6:48 pm